Compact, portable, mountable. Fully self-contained power, networking, and monitoring.

Save time and space when you arrive on set with a self-contained ATEM Mini Pro / ISO rig. Don’t bother updating network settings as you move between the office, home, and location with a built-in router. A single V-mount battery or AC adapter powers the whole system and eliminates cable clutter. Mount it on a tripod, or place it on a desk. Save footprint and cable runs by stacking laptops, mixers, cameras, or autocue on to the rig itself.

This ATEM Mini Pro / ISO rig was designed almost entirely using off-the-shelf, universal video production parts. 15-mm rods, rail blocks, NATO clamps, and 1/4-20 cheeseboards makes it highly customizable with existing production production equipment. Plus, when you out-grow your ATEM Mini, there’s no wastage since all these parts can be re-purposed in other kits, such as camera rigging.




Individual Parts, Frame, Power, & Cables

A teardown of the entire rig, as well as additional recommended items for portable live streaming.



The ISO model is recommended, but if you don’t need individual recording, try the ATEM Mini Pro instead.

Stream Deck XL (32-buttons)

The 32-button version is the best option for the Companion Profile I built.

Stream Deck (15-buttons)

If the 32-button version is sold out, the 15-button is usually still in stock.

10.1″ Lilliput Monitor

Perfect width for the Mini Pro. HDMI+SDI input and loopthrough makes it a versatile tool on set.


GL.iNet GL-MT1300 (Beryl)

Compact Gigabit travel router offering WiFi bridging and phone tethering with an intuitive user interface.

NETGEAR 5-Port Switch

12-volt DC power input makes it easy to run on an ATEM Mini Pro circuit.

Kanex 4K HDMI 2-Port Splitter

At some point, you need to split video…

Pelican Air 1615 (TrekPak)

Exterior Dimension (LWD Inches): 32.58 x 18.4 x 11.02. Designed for maximum allowable airline check-in size.


ATEM Streaming Bridge

Build this into your rig so you can have Program Out always available with one click.

Elgato Cam Link 4K

Useful to patch your MultiView display back into your computer for remote directing over Zoom.

FXLION Nano Two 98WH V-Mount Battery

98WH batteries are within carry-on flight restrictions.

Zoom LiveTrak L-8 Mixer

Powerful and affordable mixer/recorder, powered via USB 5V.


Caddie Buddy Teleprompter

This autocue will mount to the same 15mm rod system the rig uses.

Teradek Cube 655

H.264 video encoder to see MultiView on your iPad via the Vuer app. Also check out the new Camera 2 Cloud.

Teradek Ace 500

Zero-latency wireless video to connect cameras to your ATEM.

Sennheiser Wireless Combo 500 FILM G4

Note the higher-quality MKE 2 microphone is part of sets this above the non “film” version.


AOC 16T2 15.6″ Portable Monitor

Most portable monitors don’t accept 23.98fps…this one does!

Micro to Full HDMI (1ft)

Short patch cable to connect Rasberry Pi to your ATEM, or your ATEM to your AOC 15.6″ Monitor.

Raspberry Pi 4 (8GB RAM)

Build a Pi into your rig to control the ATEM via Companion and Stream Deck.

Pi 4 Armor Case

Neat heatsink/case form factor for the Pi.


100W USB-C Charger

Power your MacBook Pro

10ft USB-C Fast Charging 100W

Room to move! Connect the Charger to the Lasuney USB-C Dock with 10ft of cable! Also available in 15ft!

Lasuney USB-C Dock

Unify your networking, display, and computer interface when this dock is built into your rig.

USB-C Extension Cable 6.6ft, 100W, 20Gbps

Connect the Lasuney USB-C dock to your computer with this extension cable and consolidate power, HDMI, internet connection, audio, and network control into a single port!


SanDisk 2TB Extreme PRO Portable SSD – Up to 2000MB/s

Plenty of headroom to record all your ISO inputs.




Mount for ATEM Mini Pro

This tablet mount is easily adapted to hold the ATEM Mini Pro securely, as well as quick release with no alteration to the ATEM Mini Pro itself.

SmallRig Cheeseplate (x2)

Use one for the tablet mount, and the other to connect to a tripod plate.

CAMVATE Long Cheese Plate (x3)

Use two for the main cage structure, and the third as a vertical support for the router.

SmallRig 15mm Railblock Rod Clamp (x4)

We’ll use 4 pairs (8 in total). They’re handy, so get a 5th to be safe!


6-Inch 15mm Rod Pair (x2)

We’ll use 2 pairs (4 total) for the top and bottom of the main cage structure.

12-Inch 15mm Rod Pair

Use 1 x 12-inch rod at the back of the rig to mount devices. If you want a slightly smaller rig with fewer devices, a 10-inch rod would fit the length of the ATEM Mini Pro well.

4-Inch 15mm Rod Pair

These shorter rods are useful for mounting the camera baseplate, the Autocue, or the laptop trays.

SmallRig 15mm Rod Clamp

Used to support the cross-bar rod at the back of the rig.


SmallRig NATO Top Handle

Highly recommend this top handle for its build quality and versatility to change mounting angles. Will connect to many other cameras and devices.

SmallRig Camera Base Plate

Low-profile camera base plate that works with the 15mm rod system.

SmallRig Cold Shoe Monitor Mount

Friction hinge makes it easy to articulate the Lilliput monitor to the best viewing angle with one hand.

On-Stage MSA5000 Mic Stand Laptop Mount (x2)

Screw one of the railblocks into the tray to mount a laptop or mixer to your rig.


7cm NATO Rail

Attach this to a railblock to use as a NATO rail mounting point for the Top Handle.

SmallRig Cold Shoe Mount

Used to mount the monitor.

SmallRig Monitor Mount Cheese Plate

75mm VESA monitor mount spacing to attach the 10.1″ Lilliput Monitor to the SmallRig Cold Shoe Monitor Mount.

SmallRig Thumb Screw

Used in conjunction with the railblock to mount devices to the rod on the back of the rig.


SmallRig 15mm Rod Clamp

Use in conjunction with the Small Magic Arm to mount devices to the rod at the back of the rig.

SmallRig Small Magic Arm

Handy to mount light-weight devices.



AC to DC 12V 10A 120W Power Adapter, 5.5mm x 2.1mm DC Plug

12V/10A for plenty of current to power all the devices in the rig.

1-to-9-Way Power Splitter, DC 5.5mm x 2.1mm

10A main line, 2A on branches to deliver power to all your devices.

10-Inch DC Power Extension Cable 5.5mm x 2.1mm

These 10-inch extension cables help reach devices such as the 10.1″ Lilliput Monitor without adding bulk.

Female 5.5×2.1mm to Male 5.5×2.5mm Right-Angled DC Barrel

The Streaming Bridge and ATEM Mini Pro require a 2.5mm inner-barrel. Plus the Right-Angle saves space.

DC Female to Female Connector 5.5mm x 2.1mm

Useful to connect the power splitter to devices.

Female D-Tap

This is only part requiring soldering – to connect the Power Splitter to the D-Tap Port.

DC Power Pigtail Cable, 2.1mm x 5.5mm Barrel, 18 AWG

Solder this to the Female D-Tap (if you would like to run D-Taps via the same Power Splitter, otherwise, skip this step).

1 Male to 4 Female D-Tap Port Splitter

With this in your rig, you’ll be able to easily plug in the D-Tap power connections commonly used in video production.


D-Tap to 2.5mm DC Locking Barrel

I use this cable to connect to the ATEM Mini Pro itself, because of the more secure locking connector. You could alternatively connect it via the right angle 2.5mm DC plug.

D-Tap to 2.1mm DC Barrel

Connect a V-Mount Battery’s D-Tap Port to the 1-to-9 DC Power Splitter.

D-Tap to 2-Pin LEMO

Power Teradek devices from the D-Tap Splitter or V-Mount Battery directly.

2.1mm DC Male to 2-Pin Male LEMO

Power 2-Pin LEMO Teradek devices from the DC circuit directly (with the help of a female barrel connector)


12V to 5V Step-Down Regulator, Dual USB-A Fast Charger

Tap into the convenience of your existing 12V power and step down to 5V for devices such as the HDMI Splitter, Router, and Rasberry Pi 4.

DualLock Adhesive Fasteners

More stable than regular velcro, mount the Step-Down Regulator to the back of the tablet mount.

6-Inch USB-A to USB-C 2.0

The USB 2.0 spec isn’t intended for data, but the small size and flexibility of these cables are useful to power the router and Raspberry Pi 4 from the Step-Down Converter’s USB-A ports.

25cm USB-A to DC 5.5 x 2.1mm DC Power Cord

Power the Kanex Pro HDMI Splitter from the 12v to 5v Step-Down Regulator.


1ft 4K@60Hz HDMI Cable (x6)

You can never have enough of these…the benefit of this rig design is short cables.

1.5ft HDMI Cable

Use a slightly longer cable to reach articulating devices such as the 10.1″ Lilliput Monitor.

0.5ft Cat6 Ethernet Cable (x4)

Because the devices are so close together, most can use 1/2ft ethernet patch cables.

1ft Cat6 Ethernet Cable (x2)

The router and ATEM Mini Pro are a little further from the Netgear Switch.


1ft USB-C to USB A 3.0 Sync and Charge Cable

Leave your ATEM Mini Pro’s USB-C port connected to the Lasuney USB-C Hub for easy webcam startup.

1ft 3.5mm Stereo Audio Cable

Keep your Lasuney USB-C Hub plugged into the ATEM Mini Pro’s Mic/Line port for easy audio delivery.

KONDOR BLUE D-Tap to LPE6 Dummy Battery

Input: 12V – 17V; Output: 8V (Regulated) for Canon 5DmkIV, R5, R6 etc

RJ45 Female to Female Coupler

Connect two ethernet cables, or make an easy-to-reach patch cable for WAN access.


Items not available on Amazon

While most items on this page can be easily sourced from Amazon in a single order, these items were unavailable and need to be ordered separately:

SmallRig Heighten Rod Clamp DCD2375 (or B&H)

SmallRig Mini V-Lock Assembly Kit MD2801 (or B&H)




Advanced ATEM Control

Unlock control of the Flying Key, Palettes, Pre-Built Keys, Media Pool, Downstream Key, Audio Faders, Pre-Built Macros, VLC Playback, H2R Graphics, Wireless Control, and Tally. Plus native Stream Deck control of Google Slides, Resolve Remote Editing, Zoom integration, and more!

Get extremely versatile control over Blackmagic Design’s ATEM Mini, Pro, & ISO when you run this Companion Profile on a Stream Deck (or even your phone, tablet, or computer!).